Triple diagram method for the prediction of wave height and period   总被引：1，自引：0，他引：1  

Mehmet zger  Zekai en 《Ocean Engineering》2007,34(7):1060-1068

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.  相似文献   

Resources calculation of cobalt-rich crusts with the grid subdivision and integral method     

WU Ziyin  CHU Fengyou  MA Weilin  LI Shoujun  SHANG Jihong 《海洋学报(英文版)》2007,26(5):43-53

On the basis of three geological models and several orebody boundaries,a method of grid subdivision and integral has been proposed to calculate and evaluate the resources of cobalt-rich crusts on the seamounts in the central Pacific Ocean.The formulas of this method are deduced and the interface of program module is designed.The method is carried out in the software "Auto mapping system of submarine topography and geomorphology MBChart".This method and program will possibly become a potential tool to calculate the resources of seamounts and determine the target diggings for China's next Five-year Plan.  相似文献   

蒙特卡罗法在天然气水合物资源量计算中的应用     

曾繁彩  吴琳  张光学  梁金强  王宏斌 《海洋地质与第四纪地质》2006,26(5):139-144

天然气水合物甲烷资源量的估算是天然气水合物研究中的热点问题。运用体积法计算含水合物沉积物中的甲烷资源量时,存在参数赋值不确定的问题,从而影响了计算结果的可信度。采用蒙特卡罗法,通过计算样本的频率可以较好地评价和描述计算结果的信度,弥补体积法的不足。对采用蒙特卡罗法估算甲烷资源量的原理进行了分析和探讨,并以麦肯齐三角洲和南海海域水合物为例,计算了水合物赋存区的甲烷资源量。  相似文献   

复杂结构形式的海堤波浪力及波浪形态数值模拟     

高学平  李昌良  张尚华 《海洋学报》2006,28(1):139-145

依据雷诺方程和k-ε紊流模型,按流体体积(VOF)法追踪波浪自由表面,采用源造波法,建立数值波浪水槽,数值模拟波浪对复杂结构形式海堤的作用.数值模拟结果与经验公式、物理模型试验结果基本符合,说明所建立的数值波浪水槽合理可行.揭示了不规则波作用下复杂结构形式海堤波浪力分布规律,模拟了堤前波浪形态变化,为探讨合理的海堤结构形式提供了依据.  相似文献   

载人潜水器圆柱形耐压壳体的优化设计研究     

李学斌 《海洋技术学报》2007,26(3):5-8,12

采用分枝定界法和序列二次规划方法,对载人潜水器圆柱形耐压壳体的重量最小化进行了研究.设计变量是壳板的厚度、肋骨的型号、间距和数量,讨论了下潜深度、材料几何参数对重量以及其它特征量的影响.算例计算表明,下潜深度越大,屈服极限越高的材料重量减轻越明显.对于大深度而言,选用高屈服极限材料,可以使得材料能够充分利用.文中还对结构重量占排水量比例随深度变化的情况进行了研究.  相似文献   

Numerical simulation of solitary wave scattering by a circular cylinder array   总被引：1，自引：0，他引：1  

Ming Zhao  Liang Cheng  Bin Teng 《Ocean Engineering》2007,34(3-4):489-499

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.  相似文献   

渤、黄、东海底摩擦系数的研究     

孙丽艳  吕咸青 《海洋湖沼通报》2007,(2):7-12

本文将伴随法用于渤、黄、东海M2分潮的数值模拟,利用Topex／Poseidon高度计资料进行同化,优化海底摩擦系数。文中对底摩擦系数取常数时进行了优化,同时还对底摩擦系数的一种新的处理方法进行了研究,即在计算海区选取一些点给定底摩擦系数,海区中任意一点的底摩擦系数由这些点的底摩擦系数线性播值得到,优化后得到空间分布的底摩擦系数。针对两种不同的线性底摩擦假设分别进行了一系列的实际实验,结果表明由空间分布的底摩擦系数得到的模拟值比底摩擦系数取常数得到的模拟值更接近观测值,能有效地提高数值模拟的精度。  相似文献   

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current     

Yu-Cheng Li  Yun-Peng Zhao  Fu-Kun Gui  Bin Teng 《Ocean Engineering》2006,33(17-18):2352-2368

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.  相似文献   

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins     

周锡礽  王乐芹王晖 朱福明 《中国海洋工程》2004,18(4):567-575

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.  相似文献   

Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem   总被引：3，自引：0，他引：3  

Yong-Sik Cho  Jong-In Lee  Young-Taek Kim   《Ocean Engineering》2004,31(10):88-1335

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.  相似文献